Saturday, May 21, 2011

Chassis Progress

I've been working this past week to finish up the chassis in hopes of dropping the body on it next Friday. Today was a full day of working through the checklist. Headers are installed and torqued down, as is the water pump, water neck, and power steering pump bracket. Transmission is bolted to the engine with all the bolts, and torqued, and the exhaust is all properly hung and tightened up, save for the band clamps. All the exhaust hangers were treated to a vinegar bath to remove the rust, hit with metal prep, then painted with high temp paint.

I've been trying to mate the truck fuel injectors to the LS1 intake. I picked up some o-rings and found they were too big. Turns out my orings were fine, but the cap on the injector was bottoming out on the fuel injector boss. A few turns of a 1/2 drill bit by hand in each boss, and they were opened up sufficient for the injectors to properly mount. Now I just need to get some AN-8 nipples welded to the fuel line to remake the crossover, and need to make some brackets to bolt the fuel rails to the manifold.  The intake also needs to be bolted down and torqued after I get fresh intake gaskets.

About the biggest mandatory item is to get the transmission cooler lines run. Nice to do would be to mount up the power steering high pressure lines and the power steering cooler. Five more days to go. I might even get a chance to clean up the garage a little before the homecoming.

Still Not Pretty

I got some more pictures from Chris yesterday of Ron's color sanding of the body and other panels. Monday will be some wet sanding at 2500 grit, then the cutting and polishing to restore the luster.

Here's the start of the color sanding of the deck lid.


 Here's the panels after the machine sanding

 The white shop rags aren't staying so white with the red dust from the color sanding.

 Here's the body after wet sanding

 Wet sanded through 2000 grit.

 Shot of the passenger side wet sanded through 2000 grit.

 Front side of the car wet sanded through 2000 grit.

Left side sanded with DA to 1500 grit, back wet sanded to 2000 grit. 

Left side wet sanded at 1500, right side machine sanded.


Thursday, May 19, 2011

Not Pretty

After the shiney new paint last week, things took a turn towards ugly today. Ron started on the color sanding. Things will be better tomorrow, but all that shine was replaced with dull as the paint was knocked down with 1000 grit paper on a da sander, followed by 1500 grit.

Here's the start of the 1000 grit.

The whole car knocked down in 1000 grit, starting on the 1500 grit.

I've got another week to finish the chassis. I received some small parts in from Summit today, will be back on it tonight, hope to be ready in two days and have the week to clean things up and organize for the homecoming.

PS - while still shiney, she made it in the Orange County Register on Wednesday, slide 11 of the album.  http://www.ocregister.com/news/womack-300891-shop-national.html

Monday, May 16, 2011

New Family Room Furniture

Countdown 11 days until the planned day of reunification of the body and chassis. This morning I went over to SoCal Upholstery and picked up the interior bits. The leather looks really good. Susan graciously suggested it sit in the family room for a few weeks until I'm ready for it in the car. 

Here's all the pieces. The headrests mount to the rollbar when it's in the car. The seat covers and armrests were stitched by Al Knock Corvette Interiors. The rest was done by the local shop - headrests, steering wheel, shifter cover, shifter boot, and shifter knob.

Here's the shifter boot, cover and knob. The button was painted with the instrument cluster and rest of interior parts. Match is very good, and it was pulled from the ABS dash pad, and not the leather. Other side of the boot is double stitched like the shifter cover and arm rests. The shifter cover is upholstered over a fiberglass cover I molded last week after I touched up my mold I made a number of years ago. I still need to make a fresh Aluminum plate - I don't need both the SES and Alternator lamps that were in the previous version. 

Here's the steering wheel. The hub cover was painted with other interior parts by CW Rod & Restoration. 

She's Red

After work Friday I grabbed my camera and went by the shop to get some more pictures of Mutt all painted. I told Susan I'd be right back. She said "Right." An hour and a half later I made it home with pictures in hand. 

 Driver's side from the front

 Driver's side from the rear

Rear straight on.

Rear from the top. 

Passenger side from the rear. 

 Passenger from the front. 

 Head on at the front. 

Friday, May 13, 2011

Today is the Day - Red at last...

Yesterday, Ron finished the masking and sealed the primer. After that, the coves were painted. 

Passenger cove

Driver's Cove

Today the victory red was painted. Here's the shot from the tail of the car on the driver's side. 

From the nose of the car, looking down the passenger side of the car.  

Looking at the nose of the car, with the engine bay still masked off. 


Thursday, May 12, 2011

Bye, Bye Grey Primer

It's been a long time, with the first media blasting done 14 years ago, and the grey primer seeing duty in two Corvette caravans, several open road races, three moves and three job changes, but it's time to go. Ron finished the wet sanding today, and the crew rolled her into the paint booth to say goodbye to life in primer and say hello to life in color again. The car left the factory Ermine White, though not clear if the coves were painted. It saw numerous other colors over the years including blue, yellow, brown, light metallic green, and white again. Now it's finally time to see Red. Ron expects to paint the car tomorrow after just a bit more masking and prep.

 Here she is rolled in the booth and set up on jackstands.


A shot from the side.

 Masking off the nose and front wheel wells.

Masking off the firewall. Deck lid hinges were down when the glovebox and trunk were sprayed, so trunk hinges down this time and deck lid hinges up.

 Masking off the interior.

 Masking off the trunk and rear wheel wells.